One site visit and one quote covers everything below. Each service links to its own page if you want the technical detail.
Data & Network Cabling
New data drops for desks, phones, printers, cameras and access points, run back to your comms room and terminated on patch panels. We add drops to a working office without touching what is already live, or cable a whole building from scratch.
Cat6 for desks, VoIP phones and most fixed cameras
Cat6A for Wi-Fi 6E and Wi-Fi 7 access points and PoE++ devices
Fiber backbone between floors, between buildings on the same lot, and out to IDF closets past the 100 m limit for copper. Large distribution buildings in Vaughan almost always need it, because the far dock doors can sit hundreds of metres from the main rack.
Single-mode OS2 and multimode OM3 or OM4
Fusion splicing and termination, LC to MPO
Fiber patch panels at both ends
Loss tested, with OTDR traces where the job needs them
IP camera systems for entrances, loading docks, yards, parking lots and warehouse aisles. We run the cable, mount the cameras, set up the recorder and get viewing working on your phone before we leave.
HD and 4K IP cameras, fixed and PTZ
NVR or VMS recording sized to how long you keep footage
Card, fob, keypad and mobile entry for front doors, office suites, server rooms and shipping areas. We cable each door, install the readers and controllers, and set up who can get in and when.
Access points cabled, mounted and configured for offices, warehouse floors and outdoor yards. We can supply the hardware or install access points you already have. At the Maersk distribution centre in Caledon we installed and configured 48 of them.
New MDF and IDF builds, plus cleanups of comms rooms that have turned into a mess over the years. We pull out dead cable, re-patch, dress and label everything so your IT team can actually work in it.
Two-post racks, floor cabinets and wall cabinets
Wall cabinets fixed to a plywood backboard or studs
Abandoned cable removed during cleanups
Grounding busbar added by a licensed electrician where missing
A warehouse job in Concord, Woodbridge or along the 427 usually covers six systems at once. This is what goes into each part of the building, quoted together after one walk-through.
Typical scope for a Vaughan warehouse or distribution building
Part of the building
We install
Why it matters
Office and front counter
Cat6 + rack
Desks, phones, printers and the front door reader all land in one tidy rack.
Warehouse floor
Cat6A to APs
Scanners and forklift tablets need steady Wi-Fi between full racking.
Dock doors
Dock cameras
Every trailer and pallet movement is on video if a damage claim comes in.
Yard and gate
PTZ and LPR
Trucks, trailers and the fence line are covered from the same recorder.
Far end of the building
Fiber + IDF
Copper stops at 100 m, so fiber feeds a second closet near the far wall.
Shipping and server doors
Card access
You see who opened which door and when, and can lock out a lost fob.
We size the cable tray for all six systems on day one, so it is not already full by the time the cameras go in.
Full racking is why access point placement matters on a warehouse floor.
Where We Work In Vaughan
We cover all of Vaughan. These are the main business areas and what we usually install in each.
Concord
Keele St, Jane St, Bowes Rd, Creditstone Rd, Snidercroft Rd, Highway 7
Industrial units with an office at the front and shop or warehouse space behind. Typical jobs: office drops and a proper rack, cameras on the doors and yard, fob access on the front and shipping doors, and an access point or two for the warehouse.
Woodbridge
Highway 7, Weston Rd, Pine Valley Dr, Rowntree Dairy Rd, Steeles Ave W
Distribution, manufacturing and showroom buildings. Expect fiber out to remote IDFs, Cat6A to high-mount access points, and cameras covering every dock door and the yard.
Vaughan Metropolitan Centre
Jane St, Highway 7, Millway Ave, Interchange Way, Portage Pkwy
Office suites in newer towers. Data drops, Wi-Fi and card access on the suite door, scheduled around the building's freight elevator bookings and insurance requirements.
West Vaughan and Highway 427
Highway 427, Highway 50, Huntington Rd, Major Mackenzie Dr W, Langstaff Rd
Large new warehouses and rail facilities. The cheapest time to cable these is at fit-out, before racking goes up: tray, fiber backbone, IDFs, Wi-Fi and camera drops in one pass.
Maple, Thornhill and Kleinburg
Major Mackenzie Dr, Keele St, Centre St, Bathurst St, Islington Ave
Offices, medical clinics and retail plazas. Jobs here tend to be smaller: a few added drops, a camera system, a rack cleanup or access control on a back door. We take jobs of any size, even a single drop.
Questions From Vaughan Businesses
Yes. We cable, install and set up all three on the same job, so you deal with one contractor, one schedule and one quote. The camera and door runs also get planned with the data cabling instead of being squeezed in later.
We book onsite surveys within 48 hours. Vaughan is about 35 minutes from our Toronto office, so travel does not hold up a survey or an install.
Yes. We cover dock doors, aisles, the yard, the gate and the parking lot, usually with fixed cameras on the building and a PTZ or licence plate camera for the yard. Everything records to one NVR or VMS that you can view from your phone.
Yes. We run outdoor-rated fiber between buildings and out to gatehouses and camera poles. Where trenching is not practical, a point-to-point wireless bridge can link the two buildings instead.
Yes, any size, down to a single data drop. Clients who need regular moves, adds and changes can work from agreed rates. Everything else is quoted per job.
Yes. Evening and weekend installs are normal for us in occupied offices and running warehouses. The schedule is agreed in writing before we start.
Yes. We send the certificate of insurance, book the freight elevator and follow the building's rules for after-hours access. Your property manager knows who is coming and when.
Yes. Electrical work such as dedicated circuits for racks and new receptacles is done by our licensed electrical contractor partner and included in the same quote, so you are not managing two trades.
A Fluke DSX report for every copper run, loss and OTDR results for fiber, ports labelled at both ends and as-built drawings. A 25-year manufacturer warranty is available on qualifying cabling systems.