Skip to content
TIA-568 certified · Fluke DSX tested on every run info@velocitycabling.com (647) 812-2640
Markham · York Region · Commercial

Data, Fiber & CCTV Cabling
Markham.

One contractor for the network and the cameras. Cat6A structured cabling, OM4 and OS2 fiber backbone, IP camera and NVR installation, wireless access point cabling. Certified on every run.

Cat6A structured cabling terminated into a commercial patch panel and rack
Cat6A + fiber backbone — commercial rack build
Standard
TIA-568 compliant
Copper
Fluke DSX certified
Fiber
OTDR traces supplied
Survey
Booked in 48 hours
Straight answer

Do you install data, fiber and CCTV cabling in Markham?

Yes. Velocity Cabling installs commercial data cabling, fiber optic backbone and CCTV camera cabling throughout Markham — Markham Centre, Unionville, Buttonville, Milliken Mills, Cornell, Armadale and the Woodbine and Highway 404 corridor. Commercial and industrial only. Free onsite survey within 48 hours.

Markham runs on technology tenants, life sciences, light manufacturing and distribution, and that mix shows up in the cabling. A software floor off Allstate Parkway needs AP density and riser fiber. A plant near Denison Street needs shielded copper routed clear of machinery. A distribution building off the 404 needs high-bay tray, long runs and fiber the moment copper hits its limit. We scope all three differently.

Services

What we install across Markham

Network, fiber and security cabling scoped as one project, so you are not coordinating two trades around the same ceiling.

01

Data Cabling Markham

Structured Cat6 and Cat6A cabling for desks, wall plates, ceilings and equipment, terminated to patch panels in a proper rack. New fit-outs, floor expansions and re-cables of closets that grew without a plan.

Cat6 · Cat6A · TIA-568
02

Cat6A Structured Cabling

10GbE and PoE++ to 90W per port. What WiFi 6 and 6E access points, 4K cameras and PoE lighting need today. Shielded variants where the run passes plant equipment, VFDs or mechanical rooms.

10GbE · PoE++ 90W
03

Fiber Optic Cabling

OM4 and OM5 multimode for riser and floor-to-floor backbone. OS2 single-mode between buildings and across campus sites. On-site fusion splicing, LC and MPO termination, rack-mount enclosures.

OM4 · OM5 · OS2
04

CCTV & IP Camera Cabling

Cat6A home runs to every camera position, PoE budgeted per port, terminated and certified like any other run. Dome, bullet, multi-sensor and PTZ positions, interior and weather-sealed exterior.

PoE · 4K · multi-sensor
05

NVR & Head-End Installation

NVR and VMS server mounting, rack placement, storage sizing against retention requirements, switch and PoE budget, monitor and workstation cabling. Handed over configured, labelled and documented.

NVR · VMS · storage sizing
06

Wireless Access Point Cabling

Cat6A drops to each AP position, mounted, terminated and certified. Where there is no wireless design yet we survey first, so AP count and placement come from measured coverage rather than the floor plan.

WAP · WiFi survey · PoE++
07

Office Cabling Markham

Open plan, private offices and boardrooms. Floor boxes, poke-throughs, wall plates, AV and display drops, meeting room connectivity. Staged floor by floor so the tenancy keeps operating.

Floor boxes · boardrooms
08

Warehouse Cabling

High-bay cable tray, long horizontal runs, dock door and pick-station drops, AP cabling for scanner coverage, camera runs across aisles and yard. Built for forklift traffic and unheated bays.

Tray · high-bay · dock
09

Racks, Patch Panels & IDFs

Wall and floor cabinets, open racks, copper and fiber patch panels, vertical and horizontal managers, IDF and MDF builds. Includes re-terminating and documenting an existing closet that has drifted.

IDF · MDF · panels
Specification

Which cable does your Markham site need?

Cat6 for desk drops and phones. Cat6A for access points and 4K cameras, because both now draw PoE++ and push past 1GbE. OM4 fiber for backbone between floors. OS2 fiber between buildings. Most Markham projects use Cat6A horizontally with OM4 in the riser.

CableCarriesSpecify it forDistance
Cat61GbE / PoEDesk drops, VoIP handsets, printers, card readers100 m
Cat6A10GbE / PoE++ 90WWiFi 6 & 6E access points, 4K and multi-sensor cameras100 m
Cat6A STP10GbE shieldedPlant floors, near VFDs, motors and welding cells100 m
OM4100GbERiser backbone, floor-to-floor, IDF to MDF100 m @ 100G
OM5400GbEHigh-density backbone, future switching headroom150 m @ 400G
OS2Effectively unlimitedBuilding to building, campus links, long yard runs10 km+

Deeper detail on the Cat6A cabling, fiber optic cabling and data centre cabling pages.

Why combine them

Running the network and the cameras together

IP cameras use the same Cat6A and PoE infrastructure as your data network. Cabling both scopes in one project means one set of pulls, one tray system, one patch panel build and one set of test results — instead of two trades working around each other in the same ceiling.

The split-trade version is where most of the waste happens. A cabling contractor finishes and leaves. Weeks later a security integrator arrives, finds the tray full, runs camera cable surface-mounted along a different path, and terminates into a second patch panel nobody labelled. Now there are two documentation sets, two warranties and two people to call when a port goes down.

  • One PoE budget. Cameras, access points and phones sized against one switch plan rather than discovered later.
  • One pathway. Tray and conduit sized once for the total cable count, with fill headroom left for the next addition.
  • One test report. Camera runs certified to the same TIA-568 limits as data runs, in the same document.
  • One warranty. If a camera port fails, there is no argument about whose cable it is.
IP security camera installed on a commercial ceiling with structured Cat6A cabling
CCTV cabling — Cat6A home run, PoE, certified
Camera typeCablePoE classTypical placement
Fixed dome 4MPCat6802.3af (15W)Corridors, reception, interior general coverage
Fixed bullet 4KCat6A802.3at (30W)Entrances, dock doors, parking approaches
Multi-sensor 180/360Cat6A802.3bt (60W)Warehouse aisles, open floors, yard corners
PTZ with heaterCat6A802.3bt (90W)Exterior perimeter, yard, large lot coverage
ANPR / LPRCat6A802.3at (30W)Gates, loading entrances, vehicle chokepoints

Exterior and yard coverage is covered in more depth on our warehouse CCTV and business CCTV pages.

Coverage

Where we work in Markham

Crews are in York Region most days. Each part of Markham brings a different job, and the scope changes with it.

Markham Centre
Office towers and mixed-use around Enterprise Boulevard and Birchmount. Multi-tenant fit-outs, riser fiber, AP density.
Office / multi-tenant
Allstate Parkway & Commerce Valley
Corporate and technology tenancies. High device density, Cat6A throughout, structured moves and expansions.
Technology / corporate
Buttonville
Airport-adjacent commercial and light industrial. Mixed office and shop floor in the same envelope.
Commercial / light industrial
Milliken Mills
Established industrial around Steeles and Kennedy. Plant cabling, shielded copper, camera coverage across production.
Industrial / manufacturing
Woodbine & Highway 404
Distribution and large-format warehousing. High-bay tray, long runs, fiber past the copper limit.
Warehouse / distribution
Denison & Esna Park
Light manufacturing and trade units. Machine-adjacent routing, smaller counts, fast turnarounds.
Light manufacturing
Unionville & Main Street
Professional offices, clinics and retail in heritage and low-rise buildings. Careful routing, occupied premises.
Professional / retail
Cornell & Markham Stouffville
Healthcare, medical offices and newer commercial. Clean installs in live clinical space, evening access.
Healthcare / medical
Armadale & Middlefield
Industrial and warehousing near Markham Road. Tray, dock cabling and perimeter camera runs.
Industrial / logistics

Also covering Thornhill, Richmond Hill, Stouffville, Scarborough and the wider York Region. Call if your site is outside this list.

Get a quote

Free Markham site survey, fixed written price.

Tell us the site and roughly what you need. We look at it in person, then send an itemised quote. We do not price cabling or camera work over the phone.

  • Survey booked within 48 hours
  • Itemised written quote, fixed price
  • Fluke DSX results and OTDR traces at handover
  • Network and CCTV scoped as one project
  • Evening and weekend work available

Used only to answer this enquiry. Privacy policy.

FAQ

Markham cabling questions

Yes. Velocity Cabling installs commercial data cabling, fiber optic backbone and CCTV camera cabling throughout Markham, including Markham Centre, Unionville, Buttonville, Milliken Mills, Cornell, Armadale and the Woodbine and Highway 404 corridor. Commercial and industrial sites only. Free onsite survey booked within 48 hours.
Yes, and it is usually cheaper. IP cameras run on the same Cat6A and PoE infrastructure as your data network. Running both scopes together means one set of cable pulls, one tray system, one patch panel build and one set of test results, instead of two trades working around each other.
Cat6A is the right choice for current 4K and multi-sensor IP cameras. It supports PoE++ up to 90W per port and 10GbE bandwidth, so a camera refresh does not force a cabling refresh. Cat6 will work with older 1080p cameras but leaves no headroom.
Yes. Inter-building links use OS2 single-mode fiber, which carries traffic well past 10km. We install through existing conduit, direct-buried duct or aerial depending on the site, fusion splice every strand and supply OTDR traces for each one at handover.
Every copper run is tested with a Fluke DSX CableAnalyzer against TIA-568 pass/fail limits, and you receive the port-by-port report. Every fiber strand is OTDR tested with traces included. You also get TIA-606 labelling and a patch panel schedule.
Yes. Most work happens in live buildings. We stage area by area, protect finished space, and schedule ceiling access or core drilling for evenings and weekends. The access plan is agreed in writing before anyone is on site.
We book the site survey within 48 hours and issue the written quote after it. Most Markham projects start within one to two weeks of approval, subject to material lead times on specific camera or switch models.
Reviewed April 2026 · Velocity Cabling · Markham, Ontario
Next step

Cabling and CCTV quote for your Markham site.

Survey booked in 48 hours. Fixed written price. Certified results at handover.

Data cabling · Cat6 · Cat6A · Fiber optic
CCTV · IP cameras · NVR · WAP cabling
Office · Warehouse · Racks & IDFs