For tech offices, labs, clinics, plants and warehouses across Markham. Network, cameras and door access planned together, installed by one crew and certified before handover.
One site visit and one quote covers everything below. Each service links to its own page for the technical detail.
Data drops for software floors, labs, clinics and plant offices, terminated on patch panels and certified. Tech tenants around Allstate Parkway and Markham Centre run a lot of devices per desk, so we usually recommend Cat6A throughout.
Riser fiber in Markham Centre towers, backbone to IDFs in the distribution buildings off the 404, and single-mode links between buildings on the same campus.
IP camera systems for lobbies, plants, warehouses and parking lots. We run Cat6A to each camera, mount and aim it, set up the recorder and hand over a camera schedule with every location.
Card, fob, keypad and mobile entry for suites, labs, server rooms and clinic doors. We wire the readers, controllers and door hardware, then set it up so your team can add and remove users.
Dense Wi-Fi for open-plan floors and meeting rooms, plus coverage for warehouses and plant floors. We cable, mount and configure the access points, or install hardware you already own.
Comms rooms and IDFs built with room to grow: racks, patch panels and cable managers, with new circuits from our licensed electrical partner where needed. We also clean up rooms after years of moves and changes.
Most Markham fit-outs put desks, Wi-Fi and cameras on the same cabling and the same PoE switches. Planning them together means one pathway, one power budget and one test report. This is the cable each device gets.
| Device | Cable | Why |
|---|---|---|
| Desks and VoIP phones | Cat6 | Gigabit to 100 m at the lowest cost per drop. |
| Wi-Fi 6E and Wi-Fi 7 access points | Cat6A | Multi-gig uplinks and PoE++ with less heat in large bundles. |
| 4K bullet and plate cameras | Cat6A | Higher PoE classes and headroom for the next camera upgrade. |
| Heated PTZ cameras | Cat6A | Up to 90 W over the cable, so no separate power at the camera. |
| Switch uplinks and server room | OM4 fiber | 10 Gb and up between switches, with room to grow. |
| Between buildings | OS2 fiber | No ground faults or surges travel from one building to the other. |
We work out the PoE budget for every switch before ordering, so cameras and access points never brown out.
Every part of Markham is covered. Here is what we usually install in each business area.
Enterprise Blvd, Birchmount Rd, Warden Ave, Highway 7
Office towers and mixed-use buildings. Suite fit-outs with dense Wi-Fi, riser fiber, card access on the suite door and lobby cameras, booked around building management rules.
Allstate Pkwy, Commerce Valley Dr, Woodbine Ave, Highway 7
Corporate and tech tenancies with high device counts. Cat6A to desks and access points, server room builds and access control on labs and IT rooms.
Woodbine Ave, Highway 404, 16th Ave, Major Mackenzie Dr E
Distribution and large-format warehouses. High-bay tray, fiber to remote IDFs, scanner Wi-Fi between racking and cameras on every dock door.
Denison St, Esna Park Dr, Steeles Ave E, Kennedy Rd
Light manufacturing and trade units. Shielded cable routed away from machines, production floor cameras and a tidy rack in the plant office.
Middlefield Rd, Markham Rd, 14th Ave, Steeles Ave E
Industrial and warehousing buildings. Dock and office cabling, perimeter and yard cameras, and fob access on the shipping doors.
Main St Unionville, Highway 7 E, Bur Oak Ave, Ninth Line
Offices, clinics and retail in low-rise and heritage buildings. Smaller jobs worked around patients and staff, often in the evening. We take jobs of any size, even a single drop.
Yes, and it usually costs less. Cameras share the same Cat6A cabling, tray and PoE switches as the rest of the network, so planning them together avoids paying for pathway twice.
Cat6A for 4K, multi-sensor and heated PTZ cameras because of the higher power and data rates. Cat6 is fine for standard fixed cameras on shorter runs. Anything past about 90 m, or in another building, goes on fiber.
Yes. We install OS2 single-mode between buildings, fusion splice every strand and supply an OTDR trace for each one.
Yes. Labs, server rooms and stock rooms can each have their own access rules, so only the right people get in, and every entry is logged.
Yes. We stage the work by area and do noisy or disruptive tasks in the evening or at the weekend. The plan is agreed in writing first.
We book onsite surveys within 48 hours and send a written quote after the visit. Most projects start within one to two weeks of approval, depending on scope and material lead times.
A Fluke DSX report for every copper run, OTDR traces for fiber, TIA-606 labels, a patch schedule, a camera schedule and as-built drawings. A 25-year manufacturer warranty is available on qualifying cabling systems.
Book a free onsite survey. We walk the space, measure the runs and send a fixed, itemized written quote.
Mon–Fri 8am–10pm · Evening & weekend installs available
